Handheld Digital Light & UVA Data Loggers | Precise Illuminance & Ultraviolet Monitoring

    Digital co2 METer and thermometer zg-106



    The ZG-106 CO2 Meter is flexible, lightweight and easy to operate. In addition to measuring the CO2 concentration, the instrument can also measure the ambient temperature and humidity. This monitor is designed to monitor indoor CO2 concentration. The ZG-106 CO2 monitor can be widely used in offices, schools, exhibition halls, shopping centers, conference rooms, gyms, restaurants and other public places to ensure personal health.



    FEATURES


    Product Introduction ZG-106 has the function of measuring temperature、 CO2 and the battery is designed to be easy to carry.

    Measurement Specification CO2

    Measuring Range : 0~3,000 ppm

    Temperature Measuring Range : 0~50°C CO2

    Resolution : 1ppm @ 0~1,000ppm

    Temperature Resolution : 0.1°C (0.1°F)

    CO2 Accuracy : ±50ppm @ When lower 1,000ppm，the other is 5% Repeatability : ±20 ppm

    Temperature Coefficient : Reading Value ±0.1% or ±2 ppm, Take the largest value at 25°C

    Pressure Coefficient : 0.13% of Reading value / MmHg (It can input correct height by user))

    Opening Time : The concentration value will be displayed for about 15 seconds after power on

    Reaction Time : Approx. 2 Mins (63% changing ) Warm-up Time : Lower than 60 Sec. at 22°C (Time to complete) Display Choice : °F / °C, or Off.

    DATA SHEET

    SPECIFICATIONS


    Product Features

    DATA LOGGING : It can record 48 CO2 and temperature values measured in the past 24 hours, one record every 30 minutes

    MAXIMUM AND MINIMUM FUNCTION : It can record the maximum and minimum measured values of CO2 since the device is turned on

    ALARM : Alarm when CO2 concentration reach 1000ppm，1000ppm is ASHRAE recommend limit。It can also adjust the ppm value of alarm setting or cancel the alarm function by user

    RESTORE FACTORY MODE : After ZG-106 is adjusted, changed or damaged, the factory settings can be restored


    Multi-mode Adjustment Mode : Altitude Mode, Alarm Mode, Outdoor Mode, User Calibration Mode, Data-Log Mode


    Product Information

    Working Environment : 0~50°C / lower than 95%RH without dew。

    Storage Environment : -10~40°C / lower than 70%RH without dew。

    Elevation Limitation : Lower than 1,000 meters Sensor : NDIR (Non-dispersive infrared)

    Power Supply : DC 1.5V AA Battery x 4 or DC6V

    Battery Life : approx 80h

    Dimension : 166 × 81 × 26 mm

    Weight : 273.6 g (Battery Including)

    Accessory : Instruction Manual、Battery

    Manual

    CONTACT US



    TECPEL CO., LTD.
    Feel free to contact us with questions or comments!








    SEND
    Share by: