4-channel type K thermocouple thermo USB data logger

LCR-615 adopts ultra-low power consumption design and high-density SMD assembly process, the main and auxiliary parameters can be displayed on the LCD screen with backlight at the same time. The fresh and beautiful one-time molding two-color shell, the operation function is simple and clear, the test signal frequency can be up to 100kHz, the main parameter 40,000-digit reading and the resolution of the loss factor 0.0001, it can achieve accurate and convenient passive components for a long time in any place measuring.

Product Introduction The handheld LCR-615 has a detection frequency of 100KHz, which can measure the value of the component more accurately.

Measurement Specification Display Digits : 39,999 Digits count Test Signal : 100 / 120 / 1K / 10K / 100K Hz Capacitance Measurement : 0.01p ~ 20.000m F

Inductance Measurement : 0.01μ ~ 1000.0 H

Resistance Measurement : 0.0001 ~ 10.000M Ω

Accuracy : Max ±0.25% Test Voltage : 0.3 / 0.6 / 1 V rms Detection Rate : ４times／Sec. or 1.5 times /Sec.

Signal source output impedance : 100 Ω

Product Features

Calibration Function : Open / short

Backlit Display :

Series and Parallel Equivalent modes :

Loss Measurement (Ｄ) : ４digits display Quality Factor (Ｑ) :

４digits display Phase angle (θ) : ±180.0°

Tolerance Mode : 1%、5%、10%、20%

Auto Shut-off : 5 mins、15 mins、30 mins、60 mins 、OFF Button Lock :

Data Transfer : USB

Rechargeable batteries : Equipped with 8.4V Ni-MH 200mAH rechargeable battery

Product Information

Working Environment : 5~35°C / lower than 75%RH without dew。

Storage Environment : 0~50 °C / lower than 75%RH without dew。

Elevation Limitation : Lower than 1,000 meters Power Supply : AC:110V 60Hz / 9V

Battery Dimension : 96 x 193 x 47 mm Weight : 374g Accessory : SMD test clip, Kelvin clip, USB cable, connector socket, CD, manual

Manual

SEND

TECPEL LCR-615 100KHz Handheld LCR Meter

Specifications:

SPECIFICATIONS

CONTACT US

Feel free to contact us with questions or comments!