Handheld Digital Light & UVA Data Loggers | Precise Illuminance & Ultraviolet Monitoring

    Digital Electrical Testers



    600A, 1500A, 2000A AC/DC Current clamp-on meter



    AC /DC current Digital clamp meter
    1500A AC/ 2000 A DC + AC TRMS


    Model:DCM-2608D


    This Tecpel® clamp meter dcm-2608D is a handheld 4000-count clamp multimeter that is designed for use in the laboratory, field servicing, at home, and any circumstance where high current measurement is required.


    Digital AC/DC Current clamp meter AC 1500A, DC 2000A INRUSH Current


    Model: DCM-2609D


    This clamp meter DCM-2609D Iis a handheld 6000-count clamp meter with features of INRUSH) (TRUE RMS) (Temperature) (Backlight) bar graph display Dual Display of Frequency with Current or Voltage or % Duty Cycle Auto-ranging Auto power off


    DCM-2604D Digital AC current clamp meter AC 1000A


    Model: DCM-2604D


    This clamp meter is a handheld 6600 counts with features of ( ±Peak Hold) (TRUE RMS) (Temperature) (Backlight) , bar graph display Dual Display of Frequency with Current or Voltage or % Duty Cycle Auto ranging Auto power off Overload protections


    Digital Clamp Meter ac DC 600A, 6000 cOUNTS


    Model: DCM-033B


    This clamp meter is a hand-held automatic shifting true effective value digital hook meter. It designed in accordance with the safety standard EN61010-2010 CAT II600V/CAT III 300V level with full-function gear anti-burn protection which can meet high reliability and High safety operation require


    400a AC cURRENT, 4000 Count Digital Clamp METER


    Model: DCM-032B


    The product contains the basic functions of electrical measurement with high-precision measurement and extended temperature measurement functions. The more novel appearance design makes it an excellent measurement tool for electronic motors with superior performance.


    AC/DC Current clampmeter and Transmitter 0.001a


    Model: DCM-043


    High high resolution AC/DC clamp meter. With the resolution of 1mA and span of 100A, this current clamp transmitter is a great meter for circuit measurement or for car applications.


    dIGITAL iNSULATION TESTER



    Model: Dim-571



    DIM 571 is a LCD Indicated instruments for insulation (M Ohm), Continuity (OHM) and AC Voltage Three Insulation test voltage (DCV): 250V, 500V, 1,000V. Large LCD display(68 x 34mm) Test Insulation at rated voltate into 1 1mA load 200mA short circuit continuity current. Timer for test functions (3 ~ 5 minutes) Data Hold function Auto power off function Automatic circuit dischage Fuse proection EN61010 CAT III 600V BS 16" Edition​


    dIGITAL EARTH RESISTANCE TESTER



    Model: ERT-580



    3 Earth Ranges: 20, 200, 2000 Ohm One test current of 2 mA RMS. Indication if resistance of auxiliary spikes resistance is within range. Two or three-terminal measurement. Three-terminal measurement for earth electrode testing. Large LCD display. Data hold function. Calibration performed with supplied test leads (3 T fully compensated). Measure earth voltage up to 200V AC. Simple to use and lower power. Open loop indication with " 1 " (MSD) on display and LED Light off.



    dIGITAL iNSULATION TESTER



    Model: Dim-570



    Features : Measure insulation resistance up to 2000MΩ 1000V pulse to test insulation 3 1/2 Digit LCD Back light display Auto data hold function after releasing MEAS button Auto power off function Portability and simplicity for one hand operation Valox housing to withstand accidental drops



    pHASE SEQUENCE TESTER



    Model: PHS-863



    Two functions in one unit includng open phase and phase sequence. Large size alligator clips : able to clip on switch-board terminals easily. Identify 3 phase sequence and open phase check Applications: This model is ideal for installing conveyor lines, pump systems and interconnected drivers. Safety Approval: EN 6101-1 CAT. III. EN 61010-2-031



    pHASE SEQUENCE TESTER



    Model: PHS-864



    The PHS-864 non-contact phase sequence tester is a portable instrument designed for electricians and industrial maintenance personnel. It provides a safe, fast and accurate method to detect the phase sequence of a three-phase system.



    pHASE SEQUENCE TESTER



    Model: PHS-864A



    PHS-864A Non-contact Phase Sequence Indicator features non-contact detection, missing phase determination, and automatic shut-off function, designed for industrial detection. Equipped with a large clip and LED display, it is safe and convenient to use.



    CABLE TRACER



    Model: CT-581



    Amplifer Probe (CT-581A) The amplifier probe indentifies and traces wires or cables within a group. Without damaging the insulation Works with any Tone Generator to indentify wires. Adjustable volume to suit work environment. A plug receptable for headset or hand set. Work with 9V battery and come with soft carrying case Tone Generator( CT-581G) A great tool for locating and identifying cable pairs or individual conductors. Serves as a continuity and polarity tester A three-colored LED display for test result.



    svd-588 pERSONAL SAFETY HIGH VOLTAGE DETECTOR



    Model: SVD-588



    Personal Safety High-Voltage Detector SVD-588 can sense AC power. When a person's body is too close to a power cable or high-voltage equipment, it will make a sound to remind the person to pay attention.



    dIGITAL LOOP IMPEDENCE psc tester



    Model: LP-2811



    LP-2811 Features: Loop Impedance Range L - E , L - N: 20/200/2000 Ohm (Auto-Range) Loop Impedance Test Current : 12A at 230V/50Hz Voltage Measurement L-N, L-E : 80 to 250V AC/50Hz Earth wire / path Return Resistance : 20/200/2000 Ohm (Auto-Range) Neutral Wire Resistance : 20/200/2000 Ohm (Auto-Range) Line Wire Resistance&Transformer Windings : 20/200/2000 Ohm (Auto-Range) PSC Current (L - N) Max : 3kA PSC Current (L - N) Max : 3kA Operating Voltage : 230V +/-20%Hz



    CONTACT US



    Feel free to contact us with questions or comments!








    SEND
    Share by: