Electric Testers
    TECPEL CO., LTD.
    Digital Insulation Meter DIM-571

         Digital Insulation Tester
    Features :
    • Measure insulation resistance up to 2000MΩ
    • 1000V pulse to test insulation
    • 3 1/2 Digit LCD Back light display
    • Auto data hold function after releasing
             MEAS button
    • Auto power off function
    operation
    • Valox housing to withstand accidental drops
    FEATURES:
    • DIM 571 is a LCD Indicated instruments for
    insulation (M Ohm), Continuity (OHM) and
    AC Voltage
    • Three Insulation test voltage (DCV):
    250V, 500V, 1,000V.
    • Large LCD display(68 x 34mm)
    • Test Insulation at rated voltate into 1 1mA load
    • 200mA short circuit continuity current.
    • Timer for test functions (3 ~ 5 minutes)
    • Data Hold function
    • Auto power off function
    • Automatic circuit dischage
    • Fuse proection
    • EN61010 CAT III 600V
    • BS 16" Edition
    • Features:
    • Measures down to 0.01 Ohm.
    • 3 Earth Ranges: 20, 200, 2000 Ohm
    • One test current of 2 mA RMS.
    • Indication if resistance of auxiliary spikes
    resistance is within range.
    • Two or three-terminal measurement.
    • Three-terminal measurement for earth
    electrode testing.
    • Large LCD display.
    • Data hold function.
    • Calibration performed with supplied test leads
    (3 T fully compensated).
    • Measure earth voltage up to 200V AC.
    • Simple to use and lower power.
    • Open loop indication with " 1 " (MSD) on display
    and LED Light off.
    • Tw o functions in one unit includng open phase
    and phase sequence.
    • Large size alligator clips : able to clip on
    switch-board terminals easily.
    • Identify 3 phase sequence and open
    phase check
    • Applications: This model is ideal for installing
    conveyor lines, pump systems and
    interconnected drivers.
    • Safety Approval:  EN 6101-1 CAT. III.
    EN 61010-2-031
    Megom Insulation Tester Insulation meter dim-570
    Insulaiton Meter Tester DIM-571
    Earth Resistance Tester ERT-580
    Phase sequence indicator PHS-863
    Digital Loop Impedance PSC tester
    LP-2811 Features:
    • Loop Impedance Range L - E , L - N:
    20/200/2000 Ohm (Auto-Range)
    • Loop Impedance Test Current : 12A at
             230V/50Hz
    • Voltage Measurement L-N, L-E : 80 to 250V
             AC/50Hz
    • Earth wire / path Return Resistance :
    20/200/2000 Ohm (Auto-Range)
    • Neutral Wire Resistance :
    20/200/2000 Ohm (Auto-Range)
    • Line Wire Resistance&Transformer Windings :
    20/200/2000 Ohm (Auto-Range)
    • PSC Current (L - N) Max : 3kA
    • PSC Current (L - N) Max : 3kA
    • Operating Voltage : 230V +/-20%Hz
    Personal Safety Voltage detector
    • Warning Proximity of AC Voltage
    Cable Tracer Tone generator Amplifer probe
    This file is not intended to be viewed directly using a web browser. To create a viewable file, use the Preview in Browser or Publish to Yahoo! Web Hosting commands from within Yahoo! SiteBuilder.
    Share by: