|
|
|
|
|
|
Product ID: DTM-3101
Stem Thermometer ( DTM-3101)
LCD Digital Multi-Thermometer
DTM-3101 FUNCTION:
POWER ON/OFF, H/T, °F/°C, MAX/MIN
(°F/°C) MEMORY RECALLING FUNCTION
DTM-3101 FEATURES:
FEATURES:
MAX/MIN (°F/°C) MEMORY RECALLING
TEMPERATURE UNIT °F/°C SELECTABLE
DATA HOLD/TEST FUNCTION SELECTABLE
1 SEC. NORMAL TEMPERATURE SENSING TIME
LOW BATTERY INDICATOR
ONE HOUR AUTO SHUT OFF
133MM STAINLESS STEEL SENSOR PROBE
PROTECTIVE PLASTIC SLEEVE WITH CLIP
RUBBER COATED HOUSING
DTM-3101 SPECIFICATION:
SPECIFICATION:
MEASUREMENT RANGE: []-50°C ~ +150°C OR -58°F ~ +302°F
[]-50°C ~ +200°C OR -58°F ~ +392°F
[]-50°C ~ +300°C OR -58°F ~ +572°F
RESOLUTION : 0.1° FOR -19.9° ~ +199.9°, OTHERWISE 1°
ACCURACY : []±1°C IN THE RANGE OF -30°C ~ +150°C
[]±1.8°F IN THE RANGE OF -22°F ~ +302°F
[]±1°C IN THE RANGE OF +151°C ~ +250°C, OTHERWISE MORE THAN ± 2°C
[]±1.8°F IN THE RANGE OF +303.8°F ~ +482°F, OTHERWISE MORE THAN ± 4°F
AMBIENT TEMPERATURE FOR PLASTIC CASE: -10°C ~ +50°C OR +14°F ~ +122°F
BATTERY : 1 X 1.5 VOLTS G13 SIZE OR EQUIVALENT
OPERATION:
OPERATION:
PRESS THE "ON/OFF" BUTTON. THE THERMOMETER IS READY FOR USE.
PRESS THE "°C/°F" BUTTON TO SELECT DESIRED TEMPERATURE UNIT.
PRESS THE "H/T" BUTTON. THE WORD "HOLD" WILL FLASH TO RETAIN READING FOR
RECORDING.
PRESS THE "MAX / MIN" BUTTON. "MIN" SIGN WILL BE SHOWN. THE MINIMUM TEMPERATURE
TESTED WILL DISPLAY. PRESS THE BUTTON AGAIN. "MAX" SIGN WILL BE SHOWN. THE MAXIMUM
TEMPERATURE TESTED WILL DISPLAY. IT WILL GO BACK TO THE TESTING POSITION AFTER
THREE SECONDS.
PRECAUTIONS:
PRECAUTIONS:
TO OBTAIN THE BEST RESULTS, THE PROBE TIP SHOULD BE IMMERSED AT LEAST 10MM. INTO
THE TESTED SUBSTANCE.
REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE THERMOMETER WILL NOT
BE USED FOR LONG DURATION OF TIME OR DURING STORAGE.
THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.
Ordering Information:
DTM-3101 Stem Thermometer
Minimum Order: Negotiable
TEL: 886-2-27375866
FAX: 886-2-27373343
E-mail: sales@tecpel.net
http://www.tecpel.net
Stem Thermometer ( DTM-3101)
LCD Digital Multi-Thermometer
DTM-3101 FUNCTION:
POWER ON/OFF, H/T, °F/°C, MAX/MIN
(°F/°C) MEMORY RECALLING FUNCTION
DTM-3101 FEATURES:
FEATURES:
MAX/MIN (°F/°C) MEMORY RECALLING
TEMPERATURE UNIT °F/°C SELECTABLE
DATA HOLD/TEST FUNCTION SELECTABLE
1 SEC. NORMAL TEMPERATURE SENSING TIME
LOW BATTERY INDICATOR
ONE HOUR AUTO SHUT OFF
133MM STAINLESS STEEL SENSOR PROBE
PROTECTIVE PLASTIC SLEEVE WITH CLIP
RUBBER COATED HOUSING
DTM-3101 SPECIFICATION:
SPECIFICATION:
MEASUREMENT RANGE: []-50°C ~ +150°C OR -58°F ~ +302°F
[]-50°C ~ +200°C OR -58°F ~ +392°F
[]-50°C ~ +300°C OR -58°F ~ +572°F
RESOLUTION : 0.1° FOR -19.9° ~ +199.9°, OTHERWISE 1°
ACCURACY : []±1°C IN THE RANGE OF -30°C ~ +150°C
[]±1.8°F IN THE RANGE OF -22°F ~ +302°F
[]±1°C IN THE RANGE OF +151°C ~ +250°C, OTHERWISE MORE THAN ± 2°C
[]±1.8°F IN THE RANGE OF +303.8°F ~ +482°F, OTHERWISE MORE THAN ± 4°F
AMBIENT TEMPERATURE FOR PLASTIC CASE: -10°C ~ +50°C OR +14°F ~ +122°F
BATTERY : 1 X 1.5 VOLTS G13 SIZE OR EQUIVALENT
OPERATION:
OPERATION:
PRESS THE "ON/OFF" BUTTON. THE THERMOMETER IS READY FOR USE.
PRESS THE "°C/°F" BUTTON TO SELECT DESIRED TEMPERATURE UNIT.
PRESS THE "H/T" BUTTON. THE WORD "HOLD" WILL FLASH TO RETAIN READING FOR
RECORDING.
PRESS THE "MAX / MIN" BUTTON. "MIN" SIGN WILL BE SHOWN. THE MINIMUM TEMPERATURE
TESTED WILL DISPLAY. PRESS THE BUTTON AGAIN. "MAX" SIGN WILL BE SHOWN. THE MAXIMUM
TEMPERATURE TESTED WILL DISPLAY. IT WILL GO BACK TO THE TESTING POSITION AFTER
THREE SECONDS.
PRECAUTIONS:
PRECAUTIONS:
TO OBTAIN THE BEST RESULTS, THE PROBE TIP SHOULD BE IMMERSED AT LEAST 10MM. INTO
THE TESTED SUBSTANCE.
REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE THERMOMETER WILL NOT
BE USED FOR LONG DURATION OF TIME OR DURING STORAGE.
THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR MICROWAVE.
Ordering Information:
DTM-3101 Stem Thermometer
Minimum Order: Negotiable
TEL: 886-2-27375866
FAX: 886-2-27373343
E-mail: sales@tecpel.net
http://www.tecpel.net
TECPEL CO., LTD.
